Kwikset Smartcode 914 Installation And User Manual

6, © 2016 Spectrum Brands, Inc. The door lock will only retain valid user code types (0x01, 0x03, and 0x04). All other values will be ignored. If a user code does not exist for the corresponding configuration parameter, the lock will report a value of 0xFF. Any attempts to change the user code f…

1, 1 / 4 66073001 Rev 01 ZWave® Plus Installation and User Guide ENGLISH If drilling a new door, use the supplied template and the complete door drilling instructions available at www.kwikset.com/doorprep. Note: Additional door preparation may be required for doors with 11/2" (38 …

5, © 2016 Spectrum Brands, Inc. 1. Association Groups The lock supports 2 association groups. Per Z-Wave Plus requirements, group 1 is assigned to the Lifeline group. The Lifeline group supports the following unsolicited messages:    �…

8, © 2016 Spectrum Brands, Inc. 3. Inclusion Procedures 1. Power the lock by placing the battery pack into the lock 2. On the controller, select the option to add a device. 3. On the lock, press button ‘A’. The red LED will illuminate until the add request has been processed. 4. Ex…

7, Kwikset Smartcode 914 © 2016 Spectrum Brands, Inc.   &' Lock status LED (1:enabled) &' Autolock setting (1:enabled) &!' Buzzer (1:enabled) &(' Secure Screen…

3, 1x green 3x red Mastercode For enhanced security, a mastercode may be used when adding and deleting user codes. For more information about the mastercode, download the Programming and Troubleshooting Guide on the SmartCode 914 page at kwikset.com. Tip: You can press the Lock button bef…