Lexmark CS510 Series Operation & User’s Manual

104, Use To Blank Pages Do Not Print Print Specify whether blank pages are inserted in a print job. Note: Do Not Print is the factory default setting. Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3) Stack the pages of a print job in sequence when printing multiple copies. Note: “(1,2,3) (1,2,3)” is the f…

35, Setting up the printer software Installing the printer software 1 Obtain a copy of the software installer package. • From the software CD that came with your printer. • Go to http://support.lexmark.com, and then select your printer and operating system. 2 Run the installer, and then follow the …

152, Lexmark CS510 Series • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Reports, and then click the type of report you want to view. Configuring supply notifications from the Embedded Web Server You can determine how you would like to be notified when supp…

215, ENERGY STAR Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark. Temperature information Ambient operating temperature 15…

185, Print job takes longer than expected Action Yes No Step 1 Change the environmental settings of the printer. a From the printer control panel, navigate to: Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select O . Note: Disabling Eco-Mode or Quiet Mode may incr…

99, Use To Timeouts Hibernate Timeout Disabled 20 minutes 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month Set the time before the printer enters Hibernate mode. Note: 3 days is the factory default setting. Hibernate Timeout on Connection Hibernate Do Not Hibernate Set the pr…