Libelium Waspmote Technical Manual

23, -23- v4.3 Board conguration and programming 5.5.3. Conguring the resolution The camera can be congured with 6 dierent resolutions. The next table shows the resolution, the number of horizontal and vertical pixels and the library parameter to use with the function. Resolution HxV(pi…

31, -31- v4.3 Board conguration and programming if (answer == 1) { USB.print(F(“Uploading the picture...”)); USB.println(picture_name); // uploads le from SD card to the F…

17, -17- v4.3 Night Vision 4.2. IR cut lter 4.2.1. Description The Video Camera Sensor Board has got installed a IR cut lter. This light lter has two glasses inside. One glass allows take images with day light without a pink hue in the image, it eliminates the light over 625nm. Th…

39, Libelium Waspmote -39- v4.3 Consumption 7. Consumption This board uses four power supplies. The image sensor, luminosity sensor, IR sensor and logic of IR cut lter driver are powered through 3’3V sensor power. The image sensor also uses 2’8V power supply from Waspmote 3G/GPRS board (control isn’…

26, -26- v4.3 Board conguration and programming 5.5.10. Recording videos There are 4 functions related with recording a video: • startVideo(). Starts the recording of the video • pauseVideo(). Pauses the recording of the video • resumeVideo(). Resumes the recording of the video • stop…