Life Fitness CS45X Assembly Instructions Manual

7, Life Fitness CS45X STEP 4: FIGURE 4 7 2 3” • SECURELY assemble the two HIP PADS (5) to the HIP PAD ADJUST (2) using four RH CAPS (16), four 3/8 X 77mm BOLTS (9), four 3/ 8” SAE WASHERS (14) and four 3/8” RH WASHERS (15) as shown in FIGURE 4. (Note the the direction of the hole pattern on pad.…

1, CLUB SERIES 45 DEGREE BACK EXTENSION Part # 7320201 Rev. C Revision: 11/18/021 ASSEMBLY INSTRUCTIONS …

8, Clean: • Upholstery with mild soap and water. • Guide rods with a cotton cloth. • Hand grips with mild soap and water. • Frame damage can be repaired with touch-up paint can be purchased from your LifeFitness customer service representative at (800)351-3737. Inspect: • Cables…

3, 3 13 3/8” LOW HEIGHT LOCK NUT 14 3/8” SAE WASHER 16 RH CAP (WHITE/PLATINUM) 15 3/8” RH WASHER 9 3/8 X 77mm BOLT 12 3/8 X 93mm BOLT 8 3/8 X 66mm FLAT HEAD BOLT 10 5/16 X 1/2” SHOULDER HEAD BOLT 11 3/8 X 62mm BOLT …

5, STEP 2: FIGURE 2 5 • Pull back the SPRING PIN on the FRAME (1) and insert the PAD ADJUST (6) as shown in FIGURE 2. 1 6 4 13 16 14 15 3/8 X 66mm FLAT HEAD 8 SPRING PIN • SECURELY assemble the FORMED ANGLE (4) to the FRAME (1) using two 3/8 X 66mm FLAT HEAD BOLTS (8), two…

6, STEP 3: FIGURE 3 6 6 10 5/16 X 1/2” SHOULDER BOLT • SECURELY assemble one 5/16 X 1/2” SHOULDER BOLT (10) to the PAD ADJUST (6) as shown in FIGURE 3. …