Martin Yale 620RC Operation & User’s Manual

1, User’s Guide 620RC 18” Manual Ream Cutter Martin Yale Industries, Inc. is a manufacturer of office equipment forms and document handling products, paper trimmers, and graphic arts prod- ucts for the printing professional and modern electronic publishers. https://www.supplychimp.c…

8, Martin Yale 620RC (15) Replace blade screws (C) and (E). Remove the blade holders. Replace blade screws (B) and (D). (16) Return the blade lever to its starting position and lock it. (17) Screw in blade screw (A). (18) Using the blade lever, lower the blade carefully down to the cutting stick. (19) T…

4, 6. Cutting stick Made of tough plastic, the cutting stick is exchangeable. It may be used two times on each side (total 8 times). 7. Front safety guard The front safety guard must be lowered before each cutting operation. Only then will the blade locking device be released. The front safety g…

5, INSTALLATION The grip of the blade lever (2), clamping wheel (8), and back gauge crank with screw (11) are packed sepa- rately in a box with the machine. Please install these parts right away. The chassis and stand of the machine should to be connected as follows: 1. Set up the legs in a way that…

3, 1. Safety cap 2. Blade lever 3. Blade locking device 4. Blade 5. Blade fastener 6. Cutting stick 7. Front safety guard 8. Clamping wheel 9. Cover 10. Blade adjustment 11. Back gauge crank 12. Back gauge 13. Side gauge with scale 14. Stand 15. Light switch 16. Paper alignment guide C…