Matrox Monarch HD Operation & User’s Manual

19, 7 Matrox Monarch HD hardware • RTSP mode If Monarch HD is set to stream in RTSP mode, the unit delivers stream data once a client connects to Monarch HD using the RTSP streaming protocol, and therefore does not require you to press the Stream button. When a client connects t…

23, 11 Matrox Monarch HD hardware Remarks • A power cycle of the Monarch HD performs a simple reboot, not a reset to factory defaults. • When using the Reset button, any saved profiles for streaming and recording are maintained, and all logged errors are cleared (see “Monarch HD erro…

37, Matrox Monarch HD 25 Control Page Viewing and clearing errors Streaming and recording errors that don’t appear as a pop up error on the Control page are instantly logged in the Messages section of the Status page. The Status page displays the errors pertaining to that Monarch HD device only. To monitor stream…

22, 10 Chapter 2, Matrox Monarch HD Hardware and Connections power-up sequence during which all LEDs illuminate. The device is ready when two or more of the recording destination LEDs (USB port 1, USB port 2, SD Card) turn off, depending on your settings. To power off Monarch HD, disc…

57, 45 Automatic configuration page 1 Go to the Automatic configuration page of the Command Center. 2 In the Load settings from a web page URL field, type the URL address of a page hosting the configuration parameters. 3 Click Load. 4 (Optional) Select Load settings at device reboot …