MCi iControl Operation & User’s Manual

572, iView - Controller View 9-120 Manual # 42-02-2222 tabs. Automatic swing operation is enabled on the Configuration > Car Operation > Passenger tab. Car call eligibility is set on the Configuration > General > Car call eligi- bility tab. • Test Mode: Active when the car is on Te…

311, iControl Messages 6-35 6 Excessive Restarts Warning Description: The elevator has attempted to start movement from the same floor successively for an exces- sive number of times. This fault is issued after ten attempts. The counter is reset if the car makes one suc- cessful run. Car …

529, Configuration - Car Operation 9-77 9 Car Operation - Flood Operation Tab Flood Operation Shall Override Depending upon code requirements, flood opera- tion interaction with other operating modes is user selectable. For the mode(s) of operation selected, where the requirement…

640, iView - System View 10-30 Manual # 42-02-2222 • Select Hall Call Configuration (1 thru 8): Select a Hall call configuration here, then click on the Hall Call Riser tab to modify hall call riser assignments when split bank operation is active and this hall call configuration is in us…

703, System and LAN Ethernet 11-17 11 iBox – Car 13 192.168.191.33 “ “ “ iBox – Car 14 192.168.191.34 “ “ “ iBox – Car 15 192.168.191.35 “ “ “ iBox – Car 16 192.168.191.36 “ “ “ iBox – Car 17 192.168.191.37 “ “ “ iBox – Car 18 192.168.191.38 “ “ “ iBox �…

679, MCi iControl Diagnostic Tabs - Event Log 10-69 10 Print / Print Preview To print the event log or to view a print preview and/or print the event log from the print preview dialog: • Click the Print button , choose a printer from the Print dialog and click Print. • Click the Print Preview …