MD SPORTS 44123-15 Assembly Instructions Manual

9, FIG.3 9. Place Plastic Corners (#9) flush with table corners using three Screws (#A1) per Corner. See FIG. 3A 10. Place End Panels (#11) between the corners and flush with the table edge at the Player end of table using five Screws (#A1) per End Panel. See FIG. 3. 11. Place Sid…

4, MD SPORTS 44123-15 X 3 Strong Adults Needed No Children in Assembly Area Keep away from pets Do not use or keep product outdoors. For indoor use only. No wet/humid conditions. Power Tools - Set Low Torque High Torque over tightened TOOLS REQUIRED: Phillips Screwdriver - Not Included Standard (Flat He…

6, ASSEMBLY INSTRUCTIONS: Leg Cap Linkage Tube Cap Caster Frame Cap P1 P2 x4 x4 x12 P3 44123-15 PRE-INSTALLED PARTS 1. Find a clean, level place to begin the assembly of your Table Tennis Table Game. We recommend that three adults work together to assemble this table tennis tabl…

12, A4 A8 A3 A7 A6 X 16 X 4 X 8 X 4 X 4 X 8 A1 A3 A4 A7 A4 4 8 A6 A8 A4 A3 A4 7 3 FIG.6 17. Turn over the pre-assembled Caster Frame (#4) (see FIG. 6), then attach it to the table surfaces using two Bolts (#A7), four Washers (#A4) and two Nuts (#A3) per Table Surface. See FIG. 6A. …

10, FIG.4 13. Attach Bottom Support Tubes (#6) to the Caster Frames (#4) using four Bolts (#A7), eight Washers (#A4) and four Nuts (#A3) per Bottom Support Tube. See FIG. 4A. 14. Attach Caster with Locks (#14) to the Caster Frame (#4) using one Nut (#15) per Caster. See FIG. 4…