Midtronics MDX-500 SERIES Instruction Manual

7, 7 Midtronics B.V. Hoofdveste 6 3992 DG HOUTEN www.midtronics.com CHAPTER 4: BATTERY TEST The tester guides you through the steps of selecng your baery test parameters and interpreng the results. Before you start the test, review the instrucons in C…

6, 6 Midtronics B.V. Hoofdveste 6 3992 DG HOUTEN www.midtronics.com CHAPTER 3: TEST PREPARATION INSPECTING THE BATTERY Before starng the test visually inspect the baery for: • Cracked, buckled, or leaking case. If you see any of these defects, replace the baery. • Cor…

8, 8 Midtronics B.V. Hoofdveste 6 3992 DG HOUTEN www.midtronics.com BATTERY STANDARDS If you select JIS, the analyzer asks for the JIS part number. Scroll to the part number. To increase your scrolling speed, hold the UP or DOWN ARROW key, or use the…

12, 12 Midtronics B.V. Hoofdveste 6 3992 DG HOUTEN www.midtronics.com CHAPTER 9: ERROR MESSAGES Error Message Interpretation BATTERY POWER TOO LOW TO USE PRINTER. CONNECT TO FULLY CHARGED BATTERY 11.50 TO 16.00V Baery being tested has fallen below 9 volts. Connec…

3, Midtronics MDX-500 SERIES 3 Midtronics B.V. Hoofdveste 6 3992 DG HOUTEN www.midtronics.com When the tester is rst used the operator is asked to enter a couple of items such as language, date and me. Changes can be made aerwards by going in to the Ulity Menu and selecng CONFIG TESTER. B…