Mobatime DT.100.1C.1T Instruction Manual

16, © MOBATIME 16 / 40 800845.01 4 Setting the way of displayed time and date calculation 4.1 Basic setting – control according to source of synchronization P3 A Time zone is taken over according to the source of synchronization P4 2 – 12, A Synchronization signal type P5 0 Neither MOBAL…

18, © MOBATIME 18 / 40 800845.01 5 Setting the network parameters for NTP versions In the item P17 choose if the network parameters (IP address, subnet mask, gateway NTP servers) will be set automatically (DHCP), or manually (telnet, the clock menu), or they will not be assigned at all (e.g. for NTP…

8, © MOBATIME 8 / 40 800845.01 2.4 Mechanical drawings DT.100/57.1C.2T Luft T° Wasser T° °C °C °C °C DT.100.1C.1T DT.100.1C.2T DT.100.1C.3T °C °C °C DT.180.1C.2T DT.180.1C.1T DT.180.1C.3T °C °C 1 2 °C °C °C …

21, © MOBATIME 21 / 40 800845.01 6.2 Menu for the setting of the clock parameters Press the MENU button on the IR remote controller. See the Menu table in chapter 7. The display shows the first parameter of the menu: The actual parameter blinks, to change its value, use the +, - or 0 to 9 …

26, Mobatime DT.100.1C.1T © MOBATIME 26 / 40 800845.01 The display shows the following: Enter the four octets of the subnet mask step by step. Switch to another octet by pushing the << and >> buttons. Octets are marked by letters A, b, C a d. By pushing OK, the entered values are stored and the clock …

5, © MOBATIME 5 / 40 800845.01 1 Description General-purpose digital display may show up time (alternating the date) and up to three temperatures (depending on model). It is intended for outdoor and indoor use. Display will find use in out- and indoor swimming pools, ski resorts, industrial areas, …