Moneris iCT250 Getting Started Manual

30, Enabling optional features Configuring the Cashback Limit Follow the steps below to establish the maximum cash back amount entered during a debit Purchase. Note: The Cashback feature (see page 27) must be enabled before you follow the steps below. 1. Begin at the "WELCOME/…

2, ® MONERIS, MONERIS & Design, and MONERIS SOLUTIONS & Design are registered trade-marks of Moneris Solutions Corporation. All other marks or registered trade-marks are the property of their respective owners…

29, Moneris iCT250 Enabling optional features Enabling Cashback Prompting: Debit Follow the steps below to enable the Cashback prompt during debit Purchase transactions. Note: If this feature is enabled, the customer will be prompted to select the Cashback option and then select a Cashback amount from among three …

23, Confirming terminal is communicating with the ECR 1. Ensure that the "WELCOME/BONJOUR" screen is displayed on the terminal. 2. Initiate a Purchase transaction from the ECR to which the terminal is connected (i.e., either directly via USB or RS232 cable or indirectly via an Ethern…

5, Installing the paper roll 1. Follow these steps to install a paper roll in the terminal: a. Lift the printer latch up, and then pull back to open the lid (exposes the paper well). b. Insert the paper roll into the empty paper well with the loose end unrolling from the bottom of th…

18, Configuring terminal-to-ECR communication parameters 1. Configure the terminal's Semi-Integrated mode parameters based on the connection type used to allow the terminal to communicate with the ECR: • If the terminal is connected to the ECR via a USB cable , follow the instruc…