AB Quality 1734-OW2 Installation Instructions Manual

24, Publication 1734-IN055D-EN-P - April 2004 PN 957859-42 Supersedes Publication 1734-IN055C-EN-P - April 2002 © 2004 Rockwell International Corporation. Printed in USA …

2, 2 POINT I/O 2 or 4 Relay Output Module Publication 1734-IN055D-EN-P - April 2004 This Series C product can be used with DeviceNet and PROFIBUS adapters. It can be used with ControlNet and Ethernet adapters using RSLogix 5000, version 11 (or higher) software. Important Us…

5, POINT I/O 2 or 4 Relay Output Module 5 Publication 1734-IN055D-EN-P - April 2004 WARNING EXPLOSION HAZARD • Do not disconnect equipment unless power has been removed or the area is known to be nonhazardous. • Do not disconnect connections to this equipment unless power has been rem…

17, POINT I/O 2 or 4 Relay Output Module 17 Publication 1734-IN055D-EN-P - April 2004 Green Device on-line and has connections in the established state. Flashing Red One or more I/O connections in timed-out state Red Critical link failure - failed communication device. Device detected …

14, 14 POINT I/O 2 or 4 Relay Output Module Publication 1734-IN055D-EN-P - April 2004 ATTENTION • Do not attempt to increase load current or wattage capability beyond the maximum rating by connecting 2 or more outputs in parallel. The slightest variation in relay switching time may …

6, AB Quality 1734-OW2 6 POINT I/O 2 or 4 Relay Output Module Publication 1734-IN055D-EN-P - April 2004 Installing the Mounting Base To install the mounting base on the DIN rail, proceed as follows. 1. Position the mounting base vertically above the installed units (adapter, power supply or ex…