EDAN iM80 Operation & User’s Manual

180, Patient Monitor User Manual EMC Information - 169 - environment. Immunity test IEC/EN 60601 test level Compliance level Electromagnetic environment - guidance Conducted RF IEC/EN 61000-4-6 Radiated RF IEC/…

94, Patient Monitor User Manual Monitoring Quick TEMP - 83 - and then take it out for starting a new measurement. 2 To ensure optimal accuracy, always confirm that the correct measurement position is selected. 14.3.2 Measurements for Rec…

36, Patient Monitor User Manual Alarms - 25 - 4.4 Latching Alarms To set the alarm latch function, please select Menu > Maintenance > User Maintain > Alarm Setup and set Alarm Latch from the pull-down list. If it is set to On, when …

121, Patient Monitor User Manual Monitoring AG - 110 - adapter is of crucial importance for a successful zeroing. If a “ZERO-REQ” alarm should appear directly after a zeroing procedure, the procedure has to be repeated. Always per…

126, EDAN iM80 Patient Monitor User Manual Review - 115 - Chapter 20 Review The monitor provides 120-hour trend data of all parameters, storage of 1200 NIBP measurement results and 60 alarm events. This chapter gives detailed instructio…

183, Patient Monitor User Manual Default Settings - 172 - Alarm Level Medium Alarm Record Off Alarm High Limit (ST-X) 0.2 Alarm Low Limit (ST-X) -0.2 X stands for I, II, III, aVR, aVL, aVF, V, V1, V2, V3, V4, V5 or V6. ARR Ana…