Dante DLH6420 Installation And Operation Manual

5, 3.0 PRE-INSTALLATION INFORMATION 3.1 FRONT VIEW Figure 1 illustrates the front view of the DLH6420 unit, which uses the standard panel layout for the DLH4200B product line. A power LED indicator (green) is located on the left and a data LED (red) …

4, Dante DLH6420 2.0 DESCRIPTION The DLH6420 code distribution unit is a 16-channel RS-422 transmit only (2-wire and ground) distributor. It was designed as an accessory of the System DLH4200B, but can be used with any system that uses RS-422 serial communications. Th…

8, 5.0 OPERATION The DLH6420 unit works as a distribution repeater for expanding one RS- 422 communication port into 16 isolated and buffered RS-422 ports. The primary use for the DLH6420 is to provide quick, easy, and proper data- line distribution for serial type pan/tilt and dome …

3, 1.0 REGULATORY NOTICES NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resident…

7, 4.0 INSTALLATION Installation of the unit is straightforward. The unit is rack/wall mountable and is only 8" deep (20.25 cm). In addition to the 16 lines available for output with one unit, eight units may be daisy-chained together. This will all…