Audioaccess AVR21EN Installation Instructions Manual

27, 27 9. Disc 1 Component Video Inputs: Connect the component video outputs of a DVD player or any other video source equipped with Y/Pr/Pb or RGB component video outputs to these jacks. The factory default is for these jacks to be linked to the Disc 1 Analog Audio Inputs [circle 1] and…

68, 68 Figure 24 EzSet/EQ Warning IMPORTANT NOTE: Anyone with hearing that is sensitive to loud noises should leave the room at this point, or use ear protection sufficient to reduce the noise level. Inexpensive foam-style ear plugs, available at most drug stores, may be used to reduce the s…

85, 85 Press the ◄/► Navigation Button [oval 16] to select the source type: DVD or CD. Press the ▼/▲Navigation Button [oval 16] to move the cursor next to: BRAND. Press the ◄/► Navigation Button [oval 16] to select the appropriate brand. Press the ▼/▲Navigation Button [oval…

158, 158 MULTIROOM INSTALLATION & SETUP Installing W.H.E.N. System Components W.H.E.N. allows unprecedented flexibility in system design for incorporating whole-house A/V distribution and control and home theater. For the purpose of detailing the options, the Multi-Zone…

65, 65 LEVEL and then press the ◄/► Navigation Button [oval 16] to enter the setting that delivers the best image to your eyes on the scale of 0 to 100. Noise Reduction: When this setting is turned on, there is a reduction in the video noise that is often present in analog input sourc…

62, Audioaccess AVR21EN 62 When all settings for the surround setup have been made, press the ▼/▲ Navigation Button [oval 16] so that the cursor is next to BACK TO MAIN ROOM, and press the Set Button [oval 18] to return to the MAIN ROOM SETUP. DTS With DTS selected in SOURCES 1/AUDIO MODE , the sel…