Eliwell RadioAdapter Operation & User’s Manual

11, RadioAdapterPag. 11/12 3.5 - CHANGING CHANNEL If there is disturbance on the network channel which is affecting communication, the channel can be forced to a new one. A new channel scan can be forced or one of the four pre-selected channels can be set. 3.5.1 - SCANNING TO FIND A NEW CHANN…

1, RadioAdapter MANAGEMENT AND MONITORING ISM 2.4 GHz wireless system for plant monitoring and control USER MANUAL …

4, RadioAdapter Pag. 4/12 1.3 - CIRCUIT DIAGRAM Power Supply TTL 10 11 TTLTTLTTL RadioKey RadioAdapter RS-485 TTL RadioKey Power Supply A B C } NOT for FCC models TERMINALS RadioKey Connector to connect the RadioKey TTL TTL serial port to connect directly to devices 7-8-9 RS-485 serial port to conn…

9, RadioAdapterPag. 9/12 2.4 - CONFIGURING THE PAN-C After installing the PAN-C and all devices/components have been installed and configured (NODES and any repeaters), the PAN-C just installed must be configured in order to enable the network. Power Supply 2.4.1 - TRANSFERRING N…

6, Eliwell RadioAdapter RadioAdapter Pag. 6/12 The RadioAdapter device can function as part of the network, as a PAN-C, as a NODE or a repeater. The RadioAdapter should therefore be configured accordingly when it is actually inserted into the network. The communication network consists of: - A RadioAdapter configu…