axing RFQ-845 Operation Instructions Manual

25, 7/8 26.126 29.029 30.737 31.668 3.5.3. Chosen programmes The programme table Selected Programs shows the programmes that were activated in phase 2 and that have been selected in the Cross Multiplex. 2016-10-31 | Technical changes, design modifications, errors and misprints are subject to…

18, Operation instructions | Serie RFQ-845 and Serie RFO-845 3.3.2. DVB-C, DVB-T or DVB-T2 (for multi tuner modules) Select any tuner by the help of the buttons Tuner 1…4 . Before connecting an antenna cable to an according tuner, the LNB Power has to be set to off Enter the ce…

26, Operation instructions | Serie RFQ-845 and Serie RFO-845 3.6. Maintenance The menu entry Maintenance enables software updates, changing the IP address, changing the password, restarting the module and erasing service data. Important: If you stay on the maintenance page for more than 2.5…

12, Operation instructions | Serie RFQ-845 and Serie RFO-845 2.1.3. Power supply in the headend base unit The power supply units supply the modules with 16 V DC voltage. The current consumption of all connected modules must not exceed the maximal delivery of the power supply unit used. The remo…

27, axing RFQ-845 3.6.3. Changing the password The default password should be changed right after commissioning the module. The default password can be changed in the menu Maintenance > Set New Password. The default password is: Ramsen8262. Any new password must be 8-10 characters (letters and/or d…

1, RFQ-845 | RFQ-845CI RFO-845 | RFO-845CI 8PSK/QPSK/Multituner | DVB-T Quattro/Octo modules Operation instructions …