DFI OPS100-SH Installation Manual

10, 10 The right angle mate plug connector (p/n: FX18-60S-0.8SH) should be mated with the receptacle connector (p/n: FX18-60P-0.8SH); together, they provide interfacing for the following functions: Power Contacts: 5V, [email protected] max Display Interface: 1*DisplayPort 1.2 (4K at 60Hz) PCI Express Expansi…

11, 11 92 GND Ground - 122 PCIE-TXP2 PCIe OUT 91 GND Ground - 121 PCIE-TXN2 PCIe OUT 90 PCIE-RXP2 PCIe IN 120 GND Ground - 89 PCIE-RXN2 PCIe IN 119 GND Ground - 88 GND Ground - 118 PCIE-TXP1 PCIe OUT 87 GND Ground - 117 PCIE-TXN1 PCIe OUT 86 PCIE-RXP1 PCIe IN 116 GND Ground - 85 PCIE-RXN1 PCIe IN 1…

12, 12 Pins Pin Assignment 3 No Connect 2 PWM Control 1 Ground Both the OPS+ Module and the Docking Board provide pin headers for miscellaneous connectors. The following tables list the pin assignments of these connectors: Pins Pin Assignment 4 Speed Control 3 Sense 2 Power 1 Ground CPU Fan (…

5, DFI OPS100-SH 5 2. Secure the module by tightening the thumbscrews on the front panel. Installing the OPS100-SH into the OPS-DB The OPS+ Module has an accompanying Docking Board and allows it to serve as a standalone computing system. The plug and unplug mechanism between the OPS+ Module and …

13, 13 Physical Dimension The overall dimensions of the OPS+ Module exclusive of the front panel frame is 180 x 30 x 119 mm (W x H x D). The following illustrations show the dimensions of the OPS+ Module as well as the dimension and location of the front panel screw holes: 200.00 180.00 30.00 2-R…