Drainvac DV1A150 Owner's Manual

7, 1312 TiTreTiTreUNIT DESCRIPTION DV1A150 / DF1A150 Vacuum pipe Audioprotek muffler Audioprotek muffler 24V plug Cold water supply 2 motor unit Porthole O-ring Porthole window Outdoor vent Dust entry Rubber hand Power cord Water discharge (Dia: 2in / 5cm) UNIT DESCRIPTION DV2A310 / DF2…

17, 3332 TiTreTiTreINSTALLING THE PIPING SySTEM EXAMPLES OF PROPER AND IMPROPER INSTALLATIONS Joint with inside stoppers Thick wallThin wall For wall plates only Smooth joint without inside stoppers INSTALLING THE PIPING SySTEM EXAMPLES OF PROPER AND IMPROPER INSTALLATIONS …

8, 1514 TiTreTiTreUNIT DESCRIPTION DV2A31 / DF2A31 Vacuum pipe Audioprotek muffler 2 motor booster head 24V plug Cold water supply 2 motor unit Porthole O-ring Audioprotek muffler Porthole window Outdoor vent Outdoor vent Dust entry Rubber hand Power cord Audioprotek muffler Audioprotek muffler Po…

12, Drainvac DV1A150 2322 TiTreTiTre INSTALLING THE UNIT - STEP SEQUENCE - Clamp 2) CONNECT THE DUST AND WATER INLETS • Connect the building’s cold water supply to the unit’s water inlet. Clamp Practical plug for maintenance (When needed, use a brush to clean the inside of the tubes) INSTALLING THE UNIT -…

10, 1918 + = TiTreTiTre HOW THE MEMbRANE WORkS Cutting Pliers Measuring Tape Phillips Screwdriver Hole Saw 2.25” (57 mm) Drill 0.5” (12.5 mm) bit Mitre-Box and Saw PVC Pipe Cutter 2” (50 mm) Regular Screwdriver Socket Head Screwdriver (for the clamps) (supplied with the unit) THE TOOLS YOU…

13, 2524 TiTreTiTre INSTALLING THE UNIT - STEP SEQUENCE - Dust Inlet Dust Inlet Air Outlet Air Outlet #1 Air Outlet #2 AIR OUTLET WITH A BOOSTER HEAD Important: If your unit includes one or several booster heads, each one must be equipped with an independent air outlet. Model with no Booster Hea…