Drytac JetMounter JM63 Fuzion XD Operator's Manual

15, 13 Mounting Applications Operator’s Manual Selecting Mounting Board and Adhesive Selecting the proper mounting board/substrate is very important. Common materials that can be used are: • Foam board - FomeCor ® , GatorBoard ® , HartBoard ® , etc. • Illustration board • Rag bo…

22, Operator’s Manual 20 Care & Maintenance CAUTION: Unplug the equipment before performing any service or maintenance. • Depending on the frequency of machine use, schedule maintenance intervals monthly or semi-annually. It is recommended that maintenance be performed at least every s…

13, 11 Setup Procedures Operator’s Manual Parts Identifi cation cont. while the Foot Pedal depressed, the rollers will turn at a slower speed and an alarm will sound. Once the object is removed from the Nip area, the alarm will stop and the roller will turn at a reduced speed until the Roller Butto…

14, 12 Setup Procedures Operator’s Manual Adjusting Supply and Take-up Shaft Tensions The JM63 Fuzion XD is equipped with a Take-up Shaft on the front of the machine that winds up the release liner from the roll of adhesive or laminate during processing. Both the Take-up Shaft and Supp…

8, Drytac JetMounter JM63 Fuzion XD 6 Important Safety Information Operator’s Manual Safety Features The following safety features are designed to offer a reasonable measure of protection against injury while maintaining an operator-friendly machine. Please do not attempt to disable or alter their functionality in an…