Hanse HVS-CM500PC Operation & User’s Manual

9, MicroScope User s guide 9 1. Install with P&P Process 1) Connect Microscope to USB port of your computer 2) Checking “Browse” 10. Install of Hardware …

16, 2) Note In case microscope program was installed before, execute the existed set up program again. Above the window, choose the Remove botton and press the Next button. After remove the program completely, execute the new version of setup.exe and install program again. MicroScope User s guide …

8, MicroScope User s guide 8 9. Specifications Description HVS-CM500PC Image Sensor 318,000 pixels (VGA 1/3” CMOS) Device Type Digital Video Camera Frame Rate Up to 30 frames Interface USB Specifcation 1.1 Signal/Noise Ratio c.56dB Pixel Resolution 640 480(VGA), 320 240(CIF) Exposure C…

7, Hanse HVS-CM500PC MicroScope User s guide 7 Take off transparent window from the body. Assemble the mirror instead. Never use this product for observing your or other people s eyes as LED light cause eye s injury. 7. How to use the mirror for ear observation 8. Applicable system network Microscope…

22, MicroScope User s guide 22 1-4) Folder window This window shows picture file which would be now loaded. When picture is captured, this windows shows the captured picture. 1-5) Temp window When double-click the picture which was saved at folder, the picture is saved at Temp window. When …

15, MicroScope User s guide 15 The program will be updated on our homepage and to renew the updated program ,choose yes, check the renewed program and press the finish button. After finishing renewing program, press the Finish button, then installation is completed successfully. …