Gfp 563TH Operating Manual

17, Gfp563TH September2017 17 15. Brake Tension Adjustment 1. Adjust brake tension by turning the Tension adjustment knobs on top of each supply shaft assembly 2. Apply only enough brake tension to remove wrinkles from the vinyl web before it enters the nip rollers 3. Brake te…

18, Gfp 563TH Gfp563TH September2017 18 17. Inserting rewind shafts 1. Slide a cardboard core onto the rewind shaft 2. Rotate the locking outer sleeves on both sides of the machine to the open position 3. Align the arrow and shaft tongue with the slot in support bracket on one side 4. …

15, Gfp563TH September2017 15 12. Threading Film 1. Pull the top film web under the rewind shaft, making sure there is proper resistance. The resistance can be adjusted with the adjusting knob on top of the supply shaft assembly 2. Turn the pressure-adjustin…

14, Gfp563TH September2017 14 11. Loading Film 1. Rotate the locking outer sleeve to the open position, aligned with the inner sleeve 2. Swing the supply shaft out to load position and slide the film roll onto the shaft Note: If using Liner-in film, the web shoul…

11, Gfp563TH September2017 11 9C. Assemble machine stand 1. Remove stand from shipping box 2. Bolt cross members to stand side frame 3. Larger cross member goes in the center and takes the shorter bolts 4. Use a flat washer and lock washer – Fl…

4, Gfp563TH September2017 4 • Contact an electrician should the attachment plug provided with the laminator not match the receptacles at your location • Ensure that the voltages of the power supply you are using match the rated working voltages before operations. Do not use…