imex LX3DR Manual 

10, Specifications - LX3DR 3 x 360° Plane Laser Level - Red Beams Laser Class: Class 2 (IEC/EN60825-1/2014) Laser Wavelength: 635 ± 5nm …

9, User Guide, Maintenance and Care • The LX3D is sealed and calibrated at the plant to the accuracies specified. • It’s recommended to carry out an accuracy check before its first use and periodic checks during future use. • When not in use please power OFF the tool a…

2, Congratulations! You have chosen the Imex LX3D - 3x360°Plane Laser Level that’s guaranteed reliable and tough for professional tool users. Imex is the global brand providing professional results through accuracy and efficiency. Please read these instructions care…

8, Square • Establish a point where the 2 beams cross by using the vertical and horizontal laser beams. • Position the desired object(s) until they are aligned with both the vertical and horizontal laser beams to make sure that the object(s) are square. Full time & Outdo…

6, Operation Modes & LED Indications General Notes: • Short Press to turn laser tool ON to project all laser beams in Full Time Pulse Mode; • Press repeatedly to cycle through the available modes. • Press and hold for ≥ 2 seconds to turn laser tool OFF ONLY…

3, imex LX3DR Safety WARNING: • It is the operators’ responsibility to read the Safety Instructions and User Manual thoroughly before using this product. CAUTION: CLASS II RADIATION: • Do not stare into the laser beams. Exposure to a laser beam for an extended time may be hazar…