BRINKS ARRAY smart deadbolt Installation Instructions Manual

5, BRINKS ARRAY smart deadbolt 4. Install Latch and Strike Plate Install Strike Plate (N) in the Door Frame Strike plate (N) Dust box (P) Door Jamb 3/4" Strike Screws (EE) 3" Reinforcement Screws (FF) Reinforcement plate (O) 2. Watch the Installation Video 1. Charge Battery 3. Prep the Door Pre-Installation Inst…

2, 999-00451 Installation Instructions Box Contents Mounting Screws (2) --------- Mounting Plate Screw (1) ------------------ Latch & Strike Screws (4) --------------------------- Interior Housing Screw (1) ------------------------- Battery Compartment Screws (2) ---------------------- R…

7, Apply Gasket D. Tailpiece (C) Power Cable (E) Exterior Assembly (B) B. C. Mounting Plate Mounting Plate Remove Mounting Plate Screw Use a wrench and in a counter-clockwise motion, remove the Mounting Plate Screw (BB). Slide keypad cover up. Apply Gasket (F). Slide keypad cover dow…

8, F. Door Interior Mounting Plate (H) Tailpiece (D) Power Cable (E) Exterior Assembly (B) Bulged part of the Interior Mounting Plate (H) must be toward the door. Power Cable (E) goes underneath the latch. Insert Tailpiece (D) horizontally. E. Tailpiece (C) Power Cable (E) E. F. EXTERI…

6, Set the Latch Backset Install the Latch The distance from the center of the bore hole to the edge of the door is called the backset. If the backset of your door is 2-3/8", you don’t need to adjust the latch. The backset is preset for 2-3/8". If the backset of your door is 2-3/4, you…

12, 50 Icon, Foothill Ranch, CA 92610-3000 USA email: [email protected] www.arraylock.com | 1-800-850-5625 Made in Taiwan ©2017 Hampton Products International Corp. 999-00451E_REVA 10/17 BRINKS HOME SECURITY and all related logos are trademarks or registered trademarks of Brink�…