Comtrend Corporation WAP-5922MP Operation & User’s Manual

18, 17 Chapter 3 Repeater Mode This chapter will explain how to quickly install this device by using the quick setup method and explain each detailed setting on the web user interface while in repeater mode. 3.1 Repeater Mode Quick Installation Guide For first time setup…

47, 46 3.2.9 System Utility You can change the settings of several system-level parameters in this page, including the administrator’s password, and the IP address. To access the ‘System Utility’ menu, click ‘System Utility’ on the left. The following se…

33, 32 Item Description WPS Status If the wireless security (encryption) function of this device is properly set, the WPS status will display ‘Configured’. If the wireless security function has not been set, the WPS status will display ‘unConfigured’. Se…

24, 23 If you want to connect to a hidden access point, you can select "Setup repeater manually" to input the wireless setting manually. 5. You’ll be prompted to input the access point’s wireless security key, input it in the ‘KEY’ field and click the �…

52, 51 3.2.10.3 Reset In the event that the system stops responding correctly or stops functioning, you can perform a standard Reset or Reset to Defaults. A standard Reset will retain your settings and reboot the Wireless Mesh Point, while resetting the device to defaults …

3, Comtrend Corporation WAP-5922MP 2 Copyright Copyright© 2018 Comtrend Corporation. All rights reserved. The information contained herein is proprietary to Comtrend Corporation. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without the prior written consent of Co…