Contemporary Research ICC1-IRX Product Manual

15, Contemporary Research ICC1-IRX Contemporary Research 15 ICC1-IRX RS-232 Commands Ts & Qs The ICC1-IRX responds to Q-series tuning commands as well Channel Up TU “$A5,<dh>,<dl>,2,’TU’ ” (6 bytes) – Tunes to next channel up in Tune Ring Channel Dwn TD “$A5,<dh>,<dl>,2,…

8, Contemporary Research 8 ICC1-IRX Installation Setting Device Number and Parameters (Device Mode) Turn enclosure so the DIP switches are on the bottom In the next step, you’ll need to set up the device number and operation parameters for the ICC1-IRX. Notice that the functi…

3, Contemporary Research 3 ICC1-IRX Overview The ICC1-IRX TV Controllers deliver economical 1-way control for power, volume, channel and input commands, receiving iCC-Net network commands over the same broadband coax that carries the CATV channels. In addition to an IR emitter…

10, Contemporary Research 10 ICC1-IRX Using Display Express or IC Send Software IC Send Once you’ve installed the ICC1 controllers, you can test the operation of the system using our IC Send software. For more detailed information, go to Products/Software Tools/IC Send and download …

12, Contemporary Research 12 ICC1-IRX RS-232 Control Protocol Overview RS-232 control for up to 4000 TV Controllers is provided through an iC-series Head-End Network Controller. The ICC-HE Head-End manages iC-Net communication over RF Coax to ICC1 (1-way) and ICC2 (2-Way) TV Co…

18, Contemporary Research 18 ICC1-IRX System Map One of the key tasks for iC-Net integrators is to create a logical System Map, assigning device numbers to TV controllers so they fall into logical zones. The device mapping could be sorted by type or location; whichever suits the appli…