Bryton Rider 100 Operation & User’s Manual

10, ENGLISH Settings 11 3. Press the selection. 4. Press / to select the desired setting and press 5. Press to exit this menu. NOTE: selection. 2-grid display 3-grid display Lap Display 1. In the Settings menu, press to select Exercises > Data Page> Lap > Data Page1 …

20, Bryton Rider 100 ENGLISH Appendix 21 Heart Rate Monitor Item Description Physical size 67~100 x 26 x 15 mm Weight 14 g (sensor) / 35g (strap) Water Resistance 20 m Transmission range 5 m Battery life 1 hour per day for 24 months Operating temperature 5 o C ~ 40 o C Radio frequency/protocol 2.4GHz / Dynastream ANT+…

13, Settings14 You can change your personal information. Gender Birthday Male 1982/01/01 Height 177 cm 1. In the Settings menu, press to select Prole and press . 2. Press to select the setting that you want to change and press to enter its submenu. Gender: select your …

5, Getting Started6 Step 1: Charge your Rider 100 Connect Rider 100 to a PC to charge the battery for at least 3 hours. Unplug the device when it is fully charged. Step 2: Turn On Rider 100 Press and hold to turn on the device. Step 3: Initial Setup When turning Rider 10 instructions to complete s…

6, ENGLISH Getting Started 7 Step 4: Acquire Satellite Signals Once the Rider 100 is turned on, it will automatically search for satellite signals. It may take 30 to 60 seconds to acquire signals. Please make sure you acquire the satellite signal for the The GPS signal icon ( / • icon a…

8, Settings 9 Settings With the Settings feature, you can customize display settings, sensor settings, system General Exercises Sensors Profile Settings 1. In the main screen, press to select Settings. 2. Press to enter the Settings menu. Smart Lap With Smart . Lap by Location B…