HEIDENHAIN TNC 640 Operation & User’s Manual

366, Cycles: Turning | ADAPT ROTARY COORDINATE SYSTEM (Cycle 800, DIN/ISO: G800) 12 366 HEIDENHAIN | User’s manual for cycle programming | 10/2017 12.2 ADAPT ROTARY COORDINATE SYSTEM (Cycle 800, DIN/ISO: G800) Application This function must be adapted by your machine manufacturer. Y…

381, Cycles: Turning | TURN SHOULDER LONGITUDINAL EXTENDED (Cycle 812, DIN/ISO: G812) 12 HEIDENHAIN | User’s manual for cycle programming | 10/2017 381 Q503 End element type (0/1/2)?: Define the type of element at the end of the contour (plane surface): 0: No additional element 1: Element is a …

599, Touch Probe Cycles: Automatic Workpiece Inspection | MEASURE HOLE (Cycle 421, DIN/ISO: G421) 16 HEIDENHAIN | User’s manual for cycle programming | 10/2017 599 Q330 Tool for monitoring?: Definition of whether the TNC is to monitor the tool (See "Tool monitoring", page 588). I…

6, Fundamentals | TNC model, software and features 6 HEIDENHAIN | User’s manual for cycle programming | 10/2017 TNC model, software and features This manual describes functions and features provided by TNCs as of the following NC software numbers. TNC model NC software number TNC 640 3…

495, Using Touch Probe Cycles | Before You Start Working with Touch Probe Cycles 13 HEIDENHAIN | User’s manual for cycle programming | 10/2017 495 13.2 Before You Start Working with Touch Probe Cycles To make it possible to cover the widest possible range of applications, machine par…

591, HEIDENHAIN TNC 640 Touch Probe Cycles: Automatic Workpiece Inspection | POLAR PRESET (Cycle 1) 16 HEIDENHAIN | User’s manual for cycle programming | 10/2017 591 16.3 POLAR PRESET (Cycle 1) Cycle run Touch Probe Cycle 1 measures any position on the workpiece in any direction. 1 The touch probe moves at rapid tra…