BUFF CyberSense Manual 

4, 4 INITIAL SETUP TRANSMITTER and RECEIVER / TRANSCEIVER DigiBee / Einstein TM First, insert the transceiver into the transceiver receptacle located on the top of the DigiBee TM or Einstein TM . Next, turn on the flash unit(s). For the DigiBee, press the FREQUENCY button located on the con…

9, ADJUSTING MODELING LIGHTS ADJUSTING MODELING LIGHTS IN THE MODEL MODE When the MODELING MODE is set to ADJUST (ADJ), use the TOUCH SLIDER associated with the channel the flash unit is set to; SLIDE UP to INCREASE the output, and SLIDE DOWN to DECREASE the output. The sliders for t…

5, *The sliders have no function when the CyberSense is in this mode. INITIAL SETUP SETTING THE FREQUENCY Turn on the CyberSense remote by pressing ANY button. Press the (R) button to access the SETUP mode. While in the SETUP mode, press the (L) button to enter the FREQUENCY (FREQ) m…

12, Paul C. Buff, Inc. guarantees all CyberSync TM products for a period of two years from date of purchase. We will, at our option, repair or replace any CyberSync TM product that becomes defective during this period. Batteries are excluded from this warranty, as is any damage resulting fro…

10, BUFF CyberSense ADJUSTING DISPLAY BRIGHTNESS AND SLEEP TIMER ACCESS THE SETUP MENU Press the (R) button indicated by SETUP in the digital display. Press the (C) button to enter DISPLAY SETUP (DISP). *The sliders have no function when the CyberSense is in these modes. DISPLAY BRIGHTNESS ADJUSTMENT In DISPLAY SET…