HighPoint SSD7110 Operation & User’s Manual

28, 28 The email will include the output recorded in the event log. Example email message: Figure 1. Example event log email Recover Tab (Only for SSD7110 SAS Controller) Previously created arrays will be stored under this tab. Recovering an array from here will attempt t…

36, 36 1. The BIOS file will be in a zipped package with a naming convention such as SSD7110_v###_xxxx.zip (name of the file is subject to change) 2. Extract the contents of the file 3. Read the readme (if included) to make sure you have the correct firmware for your HBA Note: Your HBA nam…

38, 38 Click Maintenance>Add Disk> select the appropriate disk 5. Rebuild should now start. If rebuild does not start, click ‘Rescan’ on the left hand panel. Note: Rebuilding an array takes on average 2 hours per 1 Terabyte of disk capacity. The process will sc…

12, 12 Each RAID level has its pros and cons based on the application you use it for (Note: Refer to RAID level Quick Reference) Array Name: the name that will be displayed in Logical Device Information (Default: RAID_<level>_<array number>) Initialization Method: …

1, HighPoint SSD7110 1 SSD7110 Hybrid Connectivity – M.2 + SAS/SATA Ports, All-in one RAID Controller User Guide V1.00 …

16, 16 clicking the Remove Spare button. Physical drives marked as a spare will automatically be added to an array whenever there is a disk failure. This feature minimizes the chances of a data loss by reducing the time an array is in the critical status.…