CPI V2 COLIBRI 36B Series Operating Instructions Manual

45, Technical DaTa BA_v2_colibri_ccTalk_EN_1-0 45 10.3.3 Service tools Designation Order no. HENRI + On-site service tool For updating the complete coin/device conguration and rmware version (including license, USB‑PC cable, coin validator cable) HENRI + for G-13.mft P…

5, BA_v2_colibri_ccTalk_EN_1-0 5 Table of conTenTs 8 Maintenance and service 35 8.1 Cleaning the coin runway 35 8.2 Troubleshooting 36 9 What can be set later? 37 9.1 Service and conguration tools 37 9.1.1 WinEMP PC conguration application 37 9.1.2 On-site service tool HENRI + 37…

37, WhaT can be seT laTeR? BA_v2_colibri_ccTalk_EN_1-0 37 9 What can be set later? In this chapter, you will nd out general information about the NRI service and conguration tools for the v 2 colibri and what device functions you can retrospectively congure (cf. Chap. 10.3 Accessories…

44, Technical DaTa 44 BA_v2_colibri_ccTalk_EN_1-0 10.3 Accessories To customize the v 2 colibri to your own individual requirements, you can purchase the following accessories from Crane Payment Solutions: 10.3.1 Front plates Designation Order no. MIDI (black, 155 x 63mm) with white return button…

30, CPI V2 COLIBRI 36B Series opeRaTion 30 BA_v2_colibri_ccTalk_EN_1-0 If all coins are to be accepted for payment on the machine, DIL switches S1.1‑8 and S2.1‑8 on both switch blocks are in the bottom position (set to OFF). If you want to inhibit a coin channel, you only need to set the associated DIL switch…