IntelliTrac SPT1 Operation & User’s Manual

4, 2. Introduction of Features The IntelliTrac SPT1 combines State Of The Art GPS tracking technology with GSM Digital Mobile Phone SMS communications to provide an effective system for monitoring the locations of persons anywhere on the globe where there is GSM Mobile Phone Coverage. T…

6, 5. Turning On The SPT1 To the turn SPT1 ON and OFF ‐ Press the Power Button continuously for 3 seconds. A startup and shutdown tone will be heard. The following will be displayed on the LCD Screen. Press the Power Button again for 1 second. The LCD Screen display will change Press…

8, 10. SOS Emergency Alert Press the SOS Button continously for 5 seconds to send SMS Alerts to up to 5 pre programmed mobile phone numbers. The following message will be displayed on the receiver’s mobile phone. Note:A Valid Position require 3 or more satellites To display the posit…

10, IntelliTrac SPT1 12. Locating the SPT1 The SPT1 may be located by simply sending the following SMS to the device from your mobile phone. Whereis0000 Please note 0000 represents the device password which was nominated at the time of purchase. The SPT1 will respond by returning the following SMS…

2, General Notes With respect to any damages arising in operation with the described product of this document, Liberty Technology Pty. Ltd. shall be liable to the general terms and conditions on which the delivery of the described product and this document are based. This product is not int…