BYO Guitar J Bass Assembly Instructions Manual

10, Section 2 – Mockup and Fit Check J Bass Section 2 - 1 - Section 2 Contents 2 Mockup and Fit Check .................................................................................................................. - 1 - 2.1 Check Guitar Body & Neck mounting holes ......…

2, Introduction J Bass Intro - 1 - Warning These instructions assume that you are familiar with the safe operation and use of woodworking machinery and woodworking tools, and understand the techniques used to assemble this project. If you do not qualify for both of these criteria, ST…

5, Introduction J Bass Intro - 4 - Fig 1 Major Components in Your J Bass Guitar Kit These instructions assume you are familiar with the anatomy of a guitar. Refer to Figure 1 for many of the terms used in the assembly of your guitar. …

23, BYO Guitar J Bass Section 5 - Setup J Bass Section 5 - 1 - Section 5 Contents: 5. Setup ................................................................................................................................................ - 1 - 5.1 Adjust the Guitar Neck: Truss Rod .....................…

4, Introduction J Bass Intro - 3 - 4.4 Installing the Tuners .................................................................................................................. - 4 - 4.5 Install the Strings..........................................................................................…

26, Section 5 - Setup J Bass Section 5 - 4 - 3. The slot adjustment will take several iterations to ensure the depth is correct. Replace the string in the nut, retune using the tuner and check the spacing. 4. Repeat steps 1-3 until the depth is correct. 5. Repeat steps 1-4 for the remai…