Jacob Jensen IP20 Operation & User’s Manual

7, Jacob Jensen IP20 7 D. HOW TO OPERATE Making a call IP Address Pick up the handset and press or for five seconds, the mode can switch to on-hook status. In on-hook mode, press MUTE to get the local IP address. Dial Directly Set “Use # to dial immediately” to Yes (see C.3 Call setting). On-ho…

4, 4 Congratulations on your new JACOB JENSEN TM Telephone IP20. The telephone is designed in Denmark by Jacob Jensen, whose products have gained international recognition for their original, simple and classic design. Jacob Jensen has received about 100 prizes from around the world a…

6, 6 C.2 SIP Settings SIP Proxy: Setting SIP service address. SIP User ID: Setting SIP User ID. SIP Authentication ID: Setting SIP authentication ID. SIP Authentication PIN: Setting SIP authentication PIN. User Name: Setting SIP user name. NOTE: The default option of SIP Registration is Yes.…

8, 8 POE power supply Please check POE switch to confirm the power supply level. If POE supply power for audio speaker or charging basement, the power level will be 0 or 6. The MAX value is 12.95W. If POE supply power for the phone only, the power level will be 2. The MAX value is 6.4…

2, 2 CONTENTS 1. 2. CONTROLS AND FUNCTIONAL KEYSMAIN FEATURE LIST 3. Handset 1. 6 functional keys 2. 12 numerical keys 3. Message and ringing indicator Base 4. Table stand 5. Base station 6. Handset cord jack Base – rear 7. WAN Jack 8. Ethernet Cable The following ite…