Jasic TIG 200 AC/DC Analog Operator's Manual

15, Electrical schematic 7 14            �…

4, Do not weld on coated metals, unless the coating is removed from the weld area, the area is well ventilated, and while wearing an air-supplied respirator. The coatings on many metals can give off toxic fumes if welded. Prevention against burns and radiation Arc rays from the …

5, Jasic TIG 200 AC/DC Analog RF Declaration Equipment that complies with directive 2004/108/EC concerning electromagnetic compatibility (EMC) and the technical requirements of EN60974-10 is designed for use in industrial buildings and not those for domestic use where electricity is pro…

6, Product Overview 2 The TIG 200A Analog AC/DC pulse welding equipment is suited to the professional welding of stainless steel, alloy steel and carbon steel and other nonferrous metals with DC function, and also welding aluminium and aluminium alloys with AC function. The ap…

9, Control Panel 1. Pre flow gas timer control. This is the time the gas will flow prior to welding to purge the torch gas line. Adjustment 0-2Second 2. Welding current adjustment (peak current when in pulse mode) Adjustment 10-185A 3. Base current adjustment during pulse mode. Adjustme…