KAS Z-WAVE DIGITAL LOCK Manual Operation Manual

6, Page - 6 - of 8 b. If the lock has not been enrolled with any other gateway, lock sounds a short beep after 50sec indicating unenroll unsuccessfully. Unenroll operation is unnecessary. After restore factory default, the enroll status of Z-Wave is still effective. …

4, Page - 4 - of 8 Steps to setup a new lock (please follow the order） a. Change programming code (For example, change to 23456789) {12345678}+{4}+{23456789}+{23456789} b. Add user code (For example, add 123456 to the lock) {23456789}+{1}+{123456 }+{123456} Fu…

5, Page - 5 - of 8 Please be noted that the lock will not accept any user code but programming code only in vacation mode.  {programming code}, disable vocation mode. 7. How to enable button beeps (on & off)  Function Code: 6  {programming code}+{6}, toggle beep on…

2, Page - 2 - of 8 LS-8015-ZW-MM-BG General Information:  Exit setting mode: Enter * to exit the setting procedure, or wait for 10 seconds  Low battery warning: When the voltage drop…

7, Page - 7 - of 8 Device Support Command Class 设备支持的命令类 Included as no- secure node, NIF response Included as no- secure node, Anti- theft protect, NIF response Included as secure node, NIF response Included as secure node, Security support resp…