ionmax Breeze ION420 Operation & User’s Manual

5, 1 2 3 4 5 Polluted Air Clean Ionised Air PURIFICATION SYSTEM The Pre-Filter, HEPA Filter and Activated Carbon Filter are combined into one easy-to-change lter. 1. Cleanable Pre-Filter Traps large particles such as human hair, pet dander and dust particles. Helps to extend the life of …

13, WARRANTY DETAILS Congratulations on your purchase! It is our aim to provide you with quality products that you can trust. Our products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or a refund for a major failure and for c…

8, ionmax Breeze ION420 CLEANING THE UNIT ● Always unplug the power supply before cleaning the unit. ● Do not put the unit into water or use water to wash it directly. ● Do not use any corrosive or ammable detergent to clean the unit. ● Use a soft cloth with daily cleanser to clean the unit, and mak…

4, PRODUCT DIAGRAM PURIFICATION SYSTEM Model Ionmax ION420 Voltage 220-240V, 50Hz Power Rating 55W Coverage Area Up to 35 m 2 Germs Killed 99% Noise Level Low: 30dB, Medium: 40dB, High: 50dB Air Flow Low: 65m 3 /h; Medium: 183m 3 /h; High: 236m 3 /h UV Life ≥10,000 Hours Filter Life 12 mo…

7, 3. Timer button Press this button to select the timer settings for 2, 4 or 8 hours. OPERATING INSTRUCTIONS USING THE APPLIANCE 1. Power / UV-C button Press this button to turn the unit on or off. The Negative Ion generator automatically starts up and shuts down at the same time…

12, TROUBLESHOOTING GUIDE Problem Probable Cause Solution Unit not operating Power cable not plugged in Plug in power cable Power cable not plugged in properly Plug in power cable correctly Front cover not attached properly Reattach the front cover Loud noise Filters not unpacked Unpac…