Cyclades AlterPath OnBoard Series Quick Start Manual

3, 5. Connecting a Terminal to Configure Basic Network Settings 3 Methods for Enabling Web Manager Access An administrator who knows the admin user’s password (cyclades) and who has network access to the OnBoard needs to enter the OnBoard’s DNS name or IP address in a browser to…

5, 6. Enabling Access to the Web Manager 5 9. Specify the netmask. 10. Specify the broadcast address for the OnBoard. 11. Specify the hostname for the OnBoard. 12. Specify the domain name. 13. Enter the IP address for the primary DNS (domain name) server. 14. Optional: enter the IP address for …

8, Advanced Procedures Cyclades Corporation 3541 Gateway Boulevard Fremont, CA 94538 USA 1.888.CYCLADES (292.5233) 1.510.771.6100 1.510.771.6200 (fax) http://www.cyclades.com Part Number: PAC-0389 Release Date: February 2006 T To Install Two PCMCIA Cards in the Front Card Slots 1. If both cards a…

4, 6. Enabling Access to the Web Manager 4 AlterPath OnBoard QuickStart Guide 6. Enabling Access to the Web Manager Perform one of the procedures in this section to enable remote configuration using the Web Manager. T To Configure Basic Network Parameters Using a Terminal Note: Alternatively, …

6, Cyclades AlterPath OnBoard Series 7. Selecting a Security Profile, Adding Users and Configuring Devices Using the Web Manager 6 AlterPath OnBoard QuickStart Guide T To Use a Dynamic IP Address to Access the Web Manager • Enter the IP address in a browser to bring up the Web Manager to finish configuration.…