ELTA music STRING RINGER Manual 

8, ELTA music STRING RINGER LFO depth This Is a STEREO jack socket that accepts 2 different types of controllers for the LFO depth: 4. Volume Pedal (See Warning). This requires making a special cable consisting of one stereo (TIP-RING-SLEEVE) jack “A” (which plugs into the String Ringer) and two mo…

13, Oct/ring Ring Mod Mode: The LFO Depth/Manual control then scales (fine tunes) the (now static) square wave output affecting the VCO Freq. or PW (whichever is selected on the LFO selector switch). Increasing the LFO Depth/Manual amount in “UP” will push…

5, VCO out Use this as a synthesizer! Together with Carrier In, this acts as the insert point for the VCO (or “carrier') thus providing access to the VCO (regardless of whether there is anything connected to the Carrier In). WARNING: Turn down your amp or monitoring…

11, TONE A glorified name for atone pot - but this is no ordinary tone control. Clockwise it goes from a low pass, through fizzy and scooped, to a poky mid boost. At either extreme it will roll off high-end harmonics - useful for creating purer bell-like tones. BLEND Mixes straight…

7, VCO CV in This is a STEREO jack socket that accepts 8 different types of controllers for the VCO frequency: 1. Volume Pedal (See WARNING!!) a) Using a MONO cable: Connect the output of a passive (i.e. non battery-using) volume pedal (e.g. Boss FV50 or FV6O) to the socket. Use the VCO Freq.…

2, Welcome to the “string ringer” replica LOVETONE Ring stinger! STRING RINGER manual The Ring Stinger is fundamentally a ring modulator based on the original transformer matrix (and not the ubiquitous modulator chip) for that distinctive vintage ring mod sound and 60’s germaniu…