Antec MINUET 300 Operation & User’s Manual

5, 4 CONNECTING THE IEEE 1394 (FIREWIRE ® , I.LINK ® ) PORT You will fi nd a single 10-pin connector on a cable attached to the front IEEE 1394 connection. This is an Intel standard connector, which is keyed so that it can’t be accidentally reversed as long as it is connected to…

6, 5 2. Lift up and slide the drive cage from the case. 3. Place the cage upside down on a fl at surface. 4. Note: You must install the external devices fi rst, before installing the internal 3.5” device. 5. Slide the external 5.25” device into the drive cage from …

2, Antec MINUET 300 1 TABLE OF CONTENTS Minuet 300 ...................................................... 2 Setting Up ........................................................ 2 Motherborad Installation .................................. 2 Power/LED Connections .................................. 3 Connecting…

4, 3 2. Line up your motherboard with the standoff holes, and determine which ones line up and remember where they are. Not all motherboards will match with all of the provided screw holes, and this is not necessary for proper functionality. (In other words there will likely be …

8, 7 Minuet 300 - Explorer Description # Description # Description 1 Thumbscrews 8 3.5” Drive Bay Cover 2 Top Panel with Vent 9 Front Bezel 3 Power Supply 10 5.25” Drive Bay Cover 4 Flip Up Drive Cage 11 Front PCB Assembly 5 Power Switch/Cable 12 Case 6 Power LED/Cable 13 Expansion Slot Covers…