Kindermann 7488000300 Installation And User Manual

59, 59 Operation Zone: Zone to remote view the active signal and control it as a mouse. Hidden Menu: Click to open the hidden function features, including Back and Keyboard when available. Back: It sends a “Return” command to the Klick & Show Base-unit to go back to the pr…

25, 25 4.2 Pairing Sensor-button with Base-unit Connect the USB-connector of Sensor-button TOUCH to either of one USB port of Base-unit, to pair both units at same WLAN. Follow all OSD messages. A successful pairing is shown at OSD and static red LED. Then, please disconne…

32, 32 5.2.3 Set up Wi-Fi hotspot Set-up Wi-Fi hotspot includes Network SSID, Security, Frequency, Channel, Password, and Show Password. Network SSID: Click in the input filed to fill out or change to the appropriate SSID. Security: Click to select different security protocol, including …

52, Kindermann 7488000300 52 7.2 Transmitting iOS mobile device 7.2.1 How to use airplay? Airplay: Klick & Show supports “Airplay”, which enable mirroring of the desktop of your Apple device to the airplay receiver. Please swipe from bottom on desktop, to activate the control center. Click the airplay …

23, 23 4. Starting-up of Klick & Show 4.1 Mobile units: Wireless Connection Download the application namely “WirelessMedia” (scan OCR-Code) in Android Play Store or Apple App Store. “WirelessMedia” provides two ways to discover the Klick & Show: 1. Tethering &am…

36, 36 The most favorable setup is a direct line of sight between Base-unit and buttons. Any obstruction will cause the signal to follow a longer propagation path, which can degrade performance. Due to the particular radio pattern of the dipole antennas used with Base-u…