Neopost DS-75i Operation & User’s Manual

113, Fault Finding10 Messages Introduction There are three different types of messages: • Indications • Warnings • Errors Indications When you run a job, indications can appear like the ones in the example. 109 | Page 109 | Apr-28-2016 11:23 | Fault Finding 10 English …

20, High Capacity Vertical Stacker The High Capacity Vertical Stacker can be used to stack filled envelopes. The vertical stacker can store up to 325 filled envelopes. The vertical stacker can be equipped with Mail Piece Production Control (MPPC). In case you have a High Capacity Vertical Stacker, ins…

56, High Capacity Document Feeder Adjust the Side Guides To adjust the side guides B: Loosen knob D, which is located underneath the feeder tray, half a turn.1. 2. Put a small stack of documents between the side guides. 3. Rotate wheel E. The space between the side guides and the documents should be suc…

58, 2. Shift the envelope support in or out. The top side of the envelope must touch the dotted line on the support. 3. Turn the envelope support to distribute the weight of the envelopes evenly on both sides. Adjust the Side Guides and Envelope Separation Adjust the side guides and envelope separati…

138, Neopost DS-75i The Loc is the unit in the system that transports the envelope just after the document was inserted. It is called Loc (short for locomotive) as the early developments had a straight cover and a number of transportation rollers sticking out. This made it look like a locomotive from the side. I…