Antec HCG-750M Operation & User’s Manual

3, 3 80 PLUS® CERTIFICATION 80 PLUS® certification is the most widely recognized independent standard in power supply efficiency. An 80 PLUS® certified power supply uses less energy and generates less heat to stay cooler, run quieter and last longer. The HCG-750M…

4, 4 TABLE 2 Cable Quantity Connectors Socket Description 1 X 1 Fixed cable 24(20+4)-pin Motherboard 1 X 1 Fixed cable 8(4+4)-pin ATX12V/EPS12V 2 X 2 16-pin 8(6+2)-pin PCI-E 1 X 3 5-pin Molex + FDD X 1 3 X 3 …

6, 6 Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied with your PSU. PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient, making the hardwired connector the preferred…

5, Antec HCG-750M 5 INSTALLATION Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your case manual if you are unsure where the power supply should be installed. Connect the 24-pin main power connector to your motherboard. Connect the…

7, 7 Technical Support: www.antec.com/support USA & Canada 1-800-22ANTEC [email protected] Europe +49-(0)40-226-139-22 [email protected] Asia [email protected] [email protected] Visit us on Facebook for contests, information & support …

2, 2 HCG-750M Antec’s HCG M power supplies are the perfect combination of power and efficiency. The HCG M features special heavy-duty High Current connectors and cabling that supply extreme levels of power, and superb efficiency thanks to 80 PLUS® BRONZE certification and Active PF…