HPE XP7 Operation & User’s Manual

187, DescriptionItem Normal: All WWNs connected with the port are monitoring target objects. Non-Integrity: The WWN is not monitored for the corresponding port, but monitored for other ports. Edit WWN Monitor Mode confirmation window Use this window to confirm the edited monitoring information and to …

169, HPE XP7 Unit of monitoring dataItem on right side of Monitor Data fieldItem on left side of Monitor Data field msTotalResponse Time Read Write count/secTotalBack Trans. Cache To Drive Drive To Cache (Sequential) Drive To Cache (Random) %NoneDrive Usage Rate 1 %Read (Sequential)Drive Acce…

229, DescriptionItem Tip: To return the control status to No Control, specify Prio. for attributes of all ports and then click Apply. Allows you to narrow ports appearing in the list:Control List • If All is selected, all ports appear in the list. • If Prioritize is selected, only the prioritize…

231, DescriptionItem The current system control.Current Control Status • Port Control: The system is controlled by the upper limits and threshold specified on the Port tab. • WWN Control: The system is controlled by the upper limits and threshold specified on the WWN tab. • No C…

108, Figure 7 Network A: 1-to-1 connections between HBAs and ports In Network A, ports 1A and 1C are connected to high-priority production servers. Port 2A is connected to a low-priority development server. Therefore, high priority (Prio.) is set to ports 1A and 1C, and low priority (Non-Prio.)…

245, Glossary This glossary defines the special terms used in this document. Click the letter links below to navigate. access path A path through which data and commands are transferred within the storage system. array Another name for an HP XP7 storage system. bind mode In bind mode the Cache Res…