HunterDouglas Silhouette Duolite Manual, Installation Operation Care

18, OPERATION 16 9. While a shading is in motion, press the opposite of shading motion ( OPEN or  CLOSE) to reverse direction. 10. Press  FAVORITE to send selected shading(s) to your preset “favorite” position. Refer to the PowerView ™ Motorization Remote Control Guide for instructi…

3, GETTING STARTED 1 Product Views Headrail Optional Dust Cover Installation Brackets Limit Stops Remote Roller Shade Bottom Rail Rear Roller Shade Tassel Cord Front Shading Shading Bottom Rail Tassel Manual Control Button Battery Wand PowerView ™ Motorization UltraGlide ® 2 …

16, OPERATION 14 PowerView ™ Motorization Test the Shading Use the manual control button to test the shading and ensure that the motor and power source are working correctly.  Press and release the manual control button to lower the front shading and rear shade. If the shading d…

22, HunterDouglas Silhouette Duolite OPERATION 20 Problem The shading or shade is hard to raise or lower, or will not raise or lower. Solution Shadings cannot be forced into tight inside mount window openings. If an inside mount, check that the headrail is installed correctly. Make sure there is clearance between …

8, INSTALLATION 6 Mount the Installation Brackets — Outside Mount  Center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail.  Alternatively, measure the width of the headrail and use that width to mark the headrail end points…