MELAG MELAseal 200 Operating Manual

9, MELAG MELAseal 200 Chapter 3 – Commissioning 9 Commissioning Connecting the sealing device Check the following points before connecting:  The device power switch is on.  Use only the network cable included in the scope of delivery.  The USB flash drive included in the scope of delivery is plug…

12, Chapter 3 – Commissioning 12 3. Leave the lever depressed as long as the progress bar in the display completes (for 3 seconds). 4. Ideally, the film should be cut off during the sealing procedure. Move the knife to the other end of the sealing device quickly; the lever should re…

30, DIN Specifications 30 DIN Specifications Terms Sterile barrier system DIN EN ISO 11607-2:2006 replaces the terms "packaging" "end packaging" and primary packaging" with the single term "sterile barrier system." A sterile barrier system is …

22, Chapter 6 – Optional Accessories 22 The roll dispensers “komfort“ and "deluxe" are hooked onto the mounts on the rear of the sealing device. Wall-mounted roll dispenser Mounted on the wall directly over the sealing device, the wall- mounted roll…

34, MELAG Medizintechnik oHG Geneststraße 6-10 10829 Berlin Germany E-Mail: [email protected] Web: www.melag.de Responsible for content: Technical Office Subject to technical alterations Your stockist: BA_EN_seal200_v1.12.docx Rev.: 1 – 14/1414 …