Memmert HCP 108 Operating Instructions Manual

3, HCP page 3 1 General notes and safety notes ............................................................................................................ 5 1.1 Transport ..............................................................................................................…

11, HCP page 11 3.3 Material quality 3.3 Material quality For the external housing MEMMERT employs stainless steel (Mat.Ref. 1.4016). The chamber is made from stainless steel (Mat.Ref. 1.4301) which exhibits high stability, optimal hygienic properties and corrosion resistance agai…

42, HCP page 42 21 Maintenance Important for a long life of your MEMMERT product and in case of warranty claims. Note: Any work involving opening up the oven must only be carried out by a suitably qualified Any work involving opening up the oven must only be carried out by a sui…

38, HCP page 38 18 Communication interface for the PC 18.1 Communication interface RS232C The oven is provided as standard with a serial communication interface RS232C according to DIN 12 900- 1. Using this interface it is possible to control the oven from the PC and to produce reports. This…

14, HCP page 14 7 Normal operation 7 Normal operation In this operating mode the oven operates continuously. The settings for operating the oven can be selected. The settings act directly on the operation of the oven. By rotating the push/turn control the following parameters can be selec…

35, Memmert HCP 108 HCP page 35 Note: If all calibration corrections are set to 0.0 °C the factory temperature calibration is If all calibration corrections are set to 0.0 °C the factory temperature calibration is restored. °C °C °C °C °C °C calibration point1 calibration point 3 calibration …