Hydrotech 7000 SXT Valve Operation Manual

6, 5 Operating Instructions The valve has been pre-programmed with factory settings as follows: Regeneration Cycle Step Programming 1. Backwash ......................................10 minutes 2. Brine Rinse ....................................60 minutes 3. Second Backwash.........................…

8, 7 Error Codes Note: Error codes appear on the In Service display Error Display Example NOTE: Unit will flash when an error exists. Error Code Probable Cause Recover and Resetting [Err 0] [Err 1] [Err 2] [Err 3] Drive motor is stalled Drive motor is running continuously There have been more tha…

3, 2 Control Operation During Programming The control will only enter the Program Mode with the valve in Service. While in the Program Mode, the control will continue to operate normally, monitoring water usage and keeping all displays up to date. Control programming is stored in memory…

2, 1 Performance and Specifications Item Model Capacity at regeneration salt levels Service Flow Maximum Mineral Tank Brine Tank Resin Salt Shipping Number Number (kilograins as CaCO 3 ) Rate Flow To Drain Size Size Volume Capacity Weight @15lb/cf @10lb/cf* @6lb/cf USGPM (LPM) USGPM (…

7, 6 User Programming Mode Options Abbreviation Parameter Description DO Day Override The timer’s day override setting THIS IS AN OPTION ONLY. PLEASE DO NOT ADJUST BEFORE CONSULTING AN AUTHORIZED DEALER. RT Regeneration Time The time of day that the system will regenerate (meter delayed, timecl…

5, Hydrotech 7000 SXT Valve 4 4. Attach the bypass valve to the control valve. Connect the inlet and outlet of the water softener to the plumbing in the house. The control valve must not be submitted to temperatures above 71°C (110°F). When sweat fittings are used, to avoid damaging the control valve, solder t…