Mettler Electronics Sys*Stim 226 Instruction Manual

1, Sys * Stim ® 226 Instruction Manual ® 1333 South Claudina Street Anaheim, CA 92805, U. S. A. Toll Free: (800) 854–9305 Telephone: (714) 533–2221 • FAX: (714) 635–7539 Web site: www.mettlerelectronics.com • email:…

20, Mettler Electronics Corp.— Rev. D_11/09 then press . Press the surge button and then follow the instructions to set on/off times in the surge mode. First channel one will be on for the set on time and then channel two will come on during the set off time. • To review an …

10, Mettler Electronics Corp.— Rev. D_11/09 μ s Phase duration control selector—Press this button during a biphasic treatment to display phase duration. Hz Frequency control selector—Press this button during a biphasic treatment to display frequency. Amplitude modulation, u…

32, Mettler Electronics Corp.— Rev. D_11/09 32 5. “E_05” displayed in Time window. Output overcurrent detected. Current exceeded 70 mA RMS for interferential, 55 mA for premodulated, and medium frequency or 105 mA peak for biphasic. Reposition electrodes farther apart. Remo…

23, Sys * Stim 226 Instruction Manual— Rev. D_11/09 Figure 4.3—Quadpolar Electrode Placement Technique 3. Quadpolar electrode application technique Quadpolar techniques should be used with the “Interferential” waveform. The electrodes from Channel 1 are placed diagonally f…

38, Mettler Electronics Sys*Stim 226 Mettler Electronics Corp.— Rev. D_11/09 38 8.3 Amplitude Modulation Specifications: Vector rotation: Interferential Mode Only, ±50% amplitude modulation in anti phase with an eight second modulation period. Two timer option No Surge Mode: Premodulated, Medium Fr…