Odys MultiFlat 19 inch Operation & User’s Manual

26, ODYS MultiFlat 19”-CINEMA-DVB-T/DVD 26 EN This item is only available under NTSC signal mode. The items Contrast, Brightness, Color, Sharpness and Tint are only available when Picture Mode is set to User. Within the adjusting bar, you can select Contrast, Brightness, Color, Sharpness and…

10, ODYS MultiFlat 19”-CINEMA-DVB-T/DVD 10 EN 3.3 Remote Control 1. POWER button Press to enter or exit the standby mode. 2. DTV button Press to enter DTV mode. 3. ATV button Press to enter ATV mode…

21, Odys MultiFlat 19 inch ODYS MultiFlat 19”-CINEMA-DVB-T/DVD 21 EN 6 TV operation and System Setup Preparations 1. After connection, press the POWER button to turn on the power. If it is turned on, the power indicator is blue. 2. Press the INPUT button to change to ATV or DTV mode. You can go …

24, ODYS MultiFlat 19”-CINEMA-DVB-T/DVD 24 EN Channel Edit Press the ▲▼ button to select Channel Edit and press the ENTER or ► button, the screen will display as shown:  Set a favorite channel: Within the menu, press the ▲▼ button to select a channel and press the…

43, ODYS MultiFlat 19”-CINEMA-DVB-T/DVD 43 EN Angle Mark This is where you can change the camera angel of the scenes being played if the DVD this function is available. “On“: A camera symbol appears on the screen. If there are alternative view angles, a corresponding message ap…

19, ODYS MultiFlat 19”-CINEMA-DVB-T/DVD 19 EN 4.11 Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and connect the other end to t…